About Elite Crete Systems... The Elite Crete Systems history, experience and roots in the cementitious overlay industry is deeper than any other company or product line today. "Elite Crete" products were originally created as simply a "Product Brand" by specialty paint and coatings manufacturing company called Advan-Tech, who at the time only sold cementitious overlay materials to other companies under private label or re-label. Advan-Tech made the decision to create and launch their own product label line and called the brand of materials "Elite Crete" not to compete with the same companies they were already selling products to, but to go after a sector of the industry that they considered untouched by other companies, the specification segment. There just seemed to be a huge void as it pertained to architectural overlay products being specified by architects for commercial application. Much to their surprise, the "Elite Crete" label became so popular, that the demand for private labeling of specifically the "Elite Crete" products became overwhelming. What became blatantly obvious was that the experienced, quality conscious contractor wanted a single, proven product, direct from the manufacturer that had the right answer. Therefore, after selling materials under the "Elite Crete" name through Advan-Tech, they incorporated Elite Crete Systems with the focus on their own, contractor proven, quality products that countless contractors, distributors, suppliers and architects demand today. Elite Crete Systems not only set the initial and current standards for architectural concrete finishes & overlay products but they are constantly raising the bar as well. From their highly sought after training seminars, to the detailed engineering of their entire product line designed with the contractor in mind, to their commitment and dedication to a level of customer service and technical assistance is second to none in this industry. People around the Elite Crete Systems offices use words like Quality, Ease of Use and Innovative to best describe the basis of every product they manufacture. In fact, their company mission is to provide the most comprehensive architectural concrete overlay system, one that is of the highest quality, easy to use, with substantial versatility and yet reasonably priced. They manufacture one of the most complete lines in the industry and are committed to quality customer service and technical assistance. They are fully dedicated to their customers and provide them with personalized, quality service and attention. For many years, several well known companies, manufacturers and suppliers have looked to Advan-Tech and Elite Crete Systems to provide them with the products, technical assistance and solutions to their architectural concrete finishes and overlay products. About Elite Crete Systems... The Elite Crete Systems history, experience and roots in the cementitious overlay industry is deeper than any other company or product line today. "Elite Crete" products were originally created as simply a "Product Brand" by specialty paint and coatings manufacturing company called Advan-Tech, who at the time only sold cementitious overlay materials to other companies under private label or re-label. Advan-Tech made the decision to create and launch their own product label line and called the brand of materials "Elite Crete" not to compete with the same companies they were already selling products to, but to go after a sector of the industry that they considered untouched by other companies, the specification segment. There just seemed to be a huge void as it pertained to architectural overlay products being specified by architects for commercial application. Much to their surprise, the "Elite Crete" label became so popular, that the demand for private labeling of specifically the "Elite Crete" products became overwhelming. What became blatantly obvious was that the experienced, quality conscious contractor wanted a single, proven product, direct from the manufacturer that had the right answer. Therefore, after selling materials under the "Elite Crete" name through Advan-Tech, they incorporated Elite Crete Systems with the focus on their own, contractor proven, quality products that countless contractors, distributors, suppliers and architects demand today. Elite Crete Systems not only set the initial and current standards for architectural concrete finishes & overlay products but they are constantly raising the bar as well. From their highly sought after training seminars, to the detailed engineering of their entire product line designed with the contractor in mind, to their commitment and dedication to a level of customer service and technical assistance is second to none in this industry. People around the Elite Crete Systems offices use words like Quality, Ease of Use and Innovative to best describe the basis of every product they manufacture. In fact, their company mission is to provide the most comprehensive architectural concrete overlay system, one that is of the highest quality, easy to use, with substantial versatility and yet reasonably priced. They manufacture one of the most complete lines in the industry and are committed to quality customer service and technical assistance. They are fully dedicated to their customers and provide them with personalized, quality service and attention. For many years, several well known companies, manufacturers and suppliers have looked to Advan-Tech and Elite Crete Systems to provide them with the products, technical assistance and solutions to their architectural concrete finishes and overlay products. More History… Elite Crete Systems concrete overlay products have come a long way since its birth in a small, dirty, crowded paint factory, when they introduced the industry's first hybrid blended emulsion modifier. The demand for their concrete overlay systems grew quickly during its early years, adding color, stain and various sealers along the way, and earning a strong reputation for innovation, quality, durability and cost effectiveness. That reputation proved invaluable when Advan-Tech introduced its first "Concrete Restoration Overlay." They raised the industry's eyebrows by offering a concrete resurfacing material that was more resistant to freeze/thaw, deicing salts and petrochemical deterioration without the need for a protective sealer, which was unheard of from products and companies that dominated the industry at the time. Their reputation encouraged both concrete finishers as well as other construction contractors to give the materials a try, and widespread industry skepticism quickly gave way to a host of imitators. Today Elite Crete Systems is the leading manufacturer of concrete overlay systems, selling to more than 13 countries worldwide while dominating the U.S. market. Widely regarded as the "Architectural Concrete Overlay" industry's leading innovator, their products are specified and successfully installed on thousands upon thousands of projects every year. But they were not resting on their laurels. In 1998, they announced plans to officially incorporate the Elite Crete product line name that had gained so much attention and praise. Their primary purpose was to manufacture and market their own brand of concrete overlay products. Almost a year-to-the-day later - they unveiled a new Pre-Mixed Overlay Systems designed to allow specifiers the confidence that the material will perform long term as originally engineered. Dubbed the TEXTURE-PAVE™ and THIN-FINISH™ pre-mixed overlay systems, they featured expertly engineered mix designs consisting of over 9 silica quartz sizes and their legendary CPR1000 Hybrid Polymer Modifier. The Pre-Mixed Overlay Systems so impressed the architectural concrete overlay industry that it soon-after virtually eliminated the use of "liquid polymer" and/or "add your own sand" overlay systems. The Pre-Mixed Overlay Systems began shipping to distributors in 1999, and it was followed in February, 2000, by their PORTION CONTROL COLORANTS™. Response to the new colorant and coloring system was incredibly enthusiastic and overwhelming. As an editor at a well known construction magazine put it, "in a contest of all-out decorative concrete products compared to Elite Crete Systems, it looks like the other suppliers brought knives to a gun fight." In October 2001 Elite Crete Systems launched a very informal discussion forum website, www.concretelocator.com for their customers to share information with one another. Although the website got off to a slow start, it is now busiest and most frequented "architectural concrete" related website on-line. Although 2002 was a slow year for much of the U.S. economy due to 9/11, Elite Crete Systems as well as many of their Authorized Distributors and Contractors continued to see positive business growth primarily due to the fact that the architectural concrete overlay industry has a bit of "recession proof" qualities about it. 2003 to 2004 was business as usual. Elite Crete Systems set up three new Authorized Distributors in areas where there were none to better service contractors in those regions and ultimately saw 25% and 38%
growth respectively in those years. Elite Crete Systems current 2005 to 2006 plans included essentially the same strategy that has made them so successful: Creating innovative, differentiated, high-performance products through rapid prototyping, extensive testing, flexible, U.S.-based manufacturing and absolutely unsurpassed technical support, customer service and business development assistance. 2007 saw the release of Hydras Stone Dye,
and 2008 saw the release of Spartic All ™.and Reflector Enhancer ™.. Many of the ideas that keep their products on the cutting edge come from the vast experience and professionalism their customers have. The feedback provided by their customers, and their own flexible production processes, encourage a near constant stream of both new innovations and improvements to existing proven products. Based in Northern Indiana, they manufacture virtually all of their products at two factories in Valparaiso, Indiana with offices in Valparaiso and Merrillville, Indiana. In addition, they have distributors located throughout the continental United States, Canada, Europe, Australia, South Africa and other countries. | 
